Area Rug Care

No Comments

AREA RUG CARE

For best results using Capture® Carpet & Rug Dry Cleaner, address any spill immediately.

For Liquid Accidents:

1. Start with a clean, white folded towel and apply directly to the soiled area absorbing as much of the spill as you can.

2. Once the spill is absorbed, apply a mist of the Capture® pre-spray to the area followed up by a liberal application of the Capture® cleaning powder.

NOTE: There is where you must be careful when using the brush, go very light or you will change the appearance pile. Use hand(s) to work the powder into delicate carpets.

3. Once the above (2) steps are finished, allow for the powder to air dry and vacuum. Depending on how wet the carpet is, it may be ready to vacuum in an hour or you might have until wait over night.

NOTE: Try not to vacuum to soon or the stain will not be completely absorbed, the powder can be left for days with no harm. The beauty of the Capture® product is the ability of the powder to actually absorb the stain once it is dry. The liquid becomes “locked” into the powder.

Leave a Reply






Your Name (required)

Your Email (required)

Subject

Your Message